In our modern world, where digital connectivity is vital, having a robust and dependable Wi-Fi connection is key to ensuring uninterrupted internet access on numerous devices. Unfortunately, Wi-Fi signals often diminish as they travel, leading to zones in your home or workplace that suffer from weak or non-existent signal. To combat this, consider using a Wi-Fi range extender. A prime example is the Rockspace AC2100 Dual-band Wi-Fi Range Extender. This device excels in broadening your Wi-Fi network’s reach, effectively banishing any dead spots and guaranteeing uniform coverage across your area.

Setting up your Rockspace AC2100 Dual-band Wi-Fi Range Extender can be a straightforward process. Here’s a step-by-step guide to help you get started:

Pre-Installation

1. Location: Before installation, find an optimal location for your extender. It should be about halfway between your router and the area with weak Wi-Fi coverage. Ensure the location is within the wireless range of your router.
2. Power Supply: Plug the extender into a power outlet. Wait for the power LED to light up. It may take a minute for the extender to boot up.

Installation Steps

Using WPS (Wi-Fi Protected Setup):

1. WPS Button on Extender: Press the WPS button on the extender for about 2 seconds. The WPS LED should start blinking.
2. WPS on Router: Within two minutes, press the WPS button on your router. The extender will automatically begin connecting to your router’s Wi-Fi network.
3. Confirmation: Once connected, the WPS LED on the extender will turn solid, indicating a successful connection.
4. Relocation: You may need to relocate the extender for optimal performance after setup. If the signal LED is red or weak, move the extender closer to the router.

Using a Web Browser:

1. Wi-Fi Connection: Connect your computer or mobile device to the extender’s Wi-Fi network. The default network name (SSID) should be “Rockspace_EXT,” or something similar. No password is required initially.
2. Access Extender Settings: Open a web browser and enter the URL provided in the extender’s manual (commonly something like http://re.rockspace.local or a specific IP address).
3. Setup Wizard: Follow the on-screen instructions. You will need to choose your region, set up an admin password for the extender, and select the Wi-Fi network you wish to extend.
4. Wi-Fi Details: Enter the Wi-Fi password of your existing network when prompted.
5. Finalize Setup: Complete the setup by following any additional on-screen instructions. Once finished, the extender will reboot and apply the settings.

Post-Installation

• Placement: After setting up, place the extender where it can provide the best extending performance. Avoid physical obstructions and interference sources.
• Testing: Check the extended network by connecting devices to the extender’s network and testing the internet connection in areas where coverage was previously weak.
• Adjustments: If necessary, you can log back into the extender’s settings to adjust configurations like SSID, password, or firmware updates.

Tips

• Ensure your router’s firmware is up to date for the best compatibility.
• The extender’s SSID can be different from your router’s to easily distinguish between networks.
• In case of any issues, consult the user manual or Rockspace support for troubleshooting tips.

The post How to setup Rockspace AC2100 Dual-band Wi-Fi Range Extender? appeared first on Re.Rockspace.local.

In today’s digitally connected world, a strong and reliable internet connection is more important than ever. Slow or weak Wi-Fi signals can be frustrating, leading to interrupted video calls, leggy online gaming, and endless buffering during your favorite shows. Fortunately, there’s a solution: the Rock Space Wi-Fi Extender. In this comprehensive guide, we’ll walk you through the setup process step by step, troubleshoot common issues, and answer frequently asked questions to ensure you get the most out of your extender.

The Rock Space WiFi Extender is your ticket to seamless internet connectivity throughout your home. Whether you have dead zones in your living room or a weak signal in the basement, this extender promises to amplify your Wi-Fi signal, providing a stable and speedy internet connection to every corner of your space.

Why Choose the Rock Space Wi-Fi Extender

Before we dive into the setup process, let’s explore why the Rock Space Wi-Fi Extender is an excellent choice for improving your home network.

Enhanced Coverage

With its powerful amplifiers and high-gain antennas, the Rock Space extender extends your Wi-Fi coverage, eliminating dead zones and ensuring a strong signal even in the farthest corners of your home.

Easy Installation

Setting up the Rock Space Wi-Fi Extender is a breeze, thanks to multiple setup methods, including WPS, web browser configuration, and manual setup.

Fast and Stable Connectivity

Enjoy lag-free online gaming, smooth video streaming, and speedy downloads with the Rock Space extender, which boosts your existing Wi-Fi signal to provide a reliable connection.

Getting Started

Now that you’re convinced of the benefits, let’s get started with the setup process.

Unboxing Your Extender

1. Open the Rock Space Wi-Fi Extender package and check for the following items:
   • The extender unit
   • An Ethernet cable
   • A user manual
2. Ensure all components are in good condition.

Choosing the Right Location

The success of your extender largely depends on its placement. Here’s how to choose the ideal spot:

1. Position the extender midway between your Wi-Fi router and the area with weak signal coverage.
2. Keep the extender away from obstructions such as walls and electronic devices that may interfere with the signal.
3. Ensure the extender is within the range of your existing Wi-Fi network.

Setup Methods

The Rock Space WiFi Extender offers three convenient setup methods to suit your preferences.

Using WPS (Wi-Fi Protected Setup)

1. Plug the extender into an electrical outlet within the range of your Wi-Fi router.
2. Press the WPS button on your router and hold it for a few seconds.
3. Within two minutes, press the WPS button on the extender.
4. Once the connection is established, the extender’s LED indicator will turn solid green.

Configuration via Web Browser

1. Connect your computer or mobile device to the Rock Space Extender’s default Wi-Fi network (usually named “Rock Space Extender”).
2. Open a web browser and enter “re.rockspace.local” in the address bar.
3. Follow the on-screen instructions to complete the setup, including selecting your existing Wi-Fi network and entering the Wi-Fi password.
4. Once configured, your extender will restart, and you can connect your devices to the extended network.

Manual Setup with an Ethernet Cable

1. Connect one end of the provided Ethernet cable to your extender and the other end to your computer.
2. Plug the extender into an electrical outlet.
3. Open a web browser and enter “re.rockspace.local” in the address bar.
4. Follow the on-screen instructions to configure the extender manually, including selecting your existing Wi-Fi network and entering the Wi-Fi password.
5. After setup, disconnect the Ethernet cable and connect your devices to the extended network.

Troubleshooting

Even with the straightforward setup process, issues can sometimes arise. Let’s troubleshoot some common problems.

Rockspace Extender Not Powering On

If the extender does not power on:

• Ensure it is plugged into a working electrical outlet.
• Check the power indicator on the extender.
• Try a different outlet if necessary.

Failed Connection to Router

If the extender cannot connect to your router:

• Verify that you followed the setup instructions correctly.
• Ensure your router supports WPS if you are using the WPS setup method.
• Check your Wi-Fi network’s password.

No Internet Access

If you have a connection but no internet access:

• Confirm that your router is online and functioning.
• Check the extender’s LED indicator for any issues.
• Restart both the extender and your router.

Rockspace Extender Not Broadcasting Wi-Fi

If the extender is not broadcasting Wi-Fi:

• Ensure the extender is properly configured.
• Check the Wi-Fi settings in the extender’s web interface.
• Reboot the extender.

FAQ

The Rock Space WiFi Extender is your key to a robust and seamless internet connection throughout your home. Whether you opt for WPS, web browser configuration, or manual setup, you can trust this device to extend your Wi-Fi coverage effectively. Say goodbye to dead zones and hello to uninterrupted connectivity with the Rock Space WiFi Extender Setup.

Boost your Wi-Fi signal today and enjoy a more connected and hassle-free digital experience!

The post Rock Space Wi-Fi Extender: Boosting Your Internet Signal appeared first on Re.Rockspace.local.

We’ve listed the possible situations and how to fix them below.

No Signal Light on Rockspace extender-

In this case, if you don’t have a solid signal light on the extender, the possible reason is that it’s disconnected from the router. It happens when you make any changes in the router configuration, firmware update, or change the wifi password. Below are the step-by-step troubleshooting steps for all possible reasons.

1. Try to power cycle your router and extender if you haven’t done a firmware update on the router or extender. 
2. If you have changed the main WiFi password, you have to reset your Rockspace extender and reconfigure it with the new password. If you don’t know how to RESET Rockspace extender, try to read this article “RESET Rockspace extender“.
3. Make sure the extender isn’t plugged into a surge protector. 

Red Light on the Rockspace Extender-

If you have a red light on the Rockspace extender, that means it has a connectivity issue. It happens when your Rockspace extender is not able to receive a wifi signal from the main router or you have so many walls in between the router and extender. 

Try the following troubleshooting steps to resolve this issue.

1. Try to plug the extender into the wifi range. They vary from model to model in how much distance they can cover. Check the manual and place your extender accordingly. 
2. Check the router’s WiFi channel settings. Increase or set the channels to Auto mode.
3. Try to update the firmware of your router for better performance. 

Blinking lights on Rockspace extender-

If your Rockspace extender is showing blinking lights continuously, it means it’s either a hardware issue or due to some corrupted firmware update. The reason behind the corrupted firmware update is that your extender powers off during the firmware update. 

Try the troubleshooting steps below to fix this problem.

1. Try to RESET your Rockspace extender. Push the Reset button for 20 seconds while it is plugged into the power. 
2. Try to update or reinstall the firmware. 
3. If your device is still covered under warranty, try to replace it. 

The post How Do I Fix My Rockspace Extender not Working Issue? appeared first on Re.Rockspace.local.

This article will be able to resolve the issue many customers face in getting the “Rock Space login screen”. It usually happens when users mistype the login URL or search for “rackspace login” instead of “rockspace login”. 

So, in order to resolve the issue, make sure you complete the steps outlined below.

Rockspace Extender Login:

To access the Rocksace Login page, ensure that you are using the right web URL. “Re.rockspace.local” is the proper URL. This link may only be used for the new Rockspace Extender. You can’t access the Rockspace extender setup or admin page after it’s linked to the router. log in to the router admin page to get the IP address assigned to the Rockspace extender. You can use the IP address to get to the admin page. 

Rockspace Extender Default Password:

Once you are able to get to the login screen, you will be prompted for the default username and password. Many users are stuck on this step as they are not aware of the Rockspace Extender default password. They usually type in the wifi password, which is incorrect. The default username and password for Rockspace extender is “admin”. Once you enter the default password, click the login button, and you will be logged in to the Rockspace setup page. It is suggested to change the default username and password as soon as possible after a successful setup. 

FAQ

The post How to Get to the Rock Space Login Screen? appeared first on Re.Rockspace.local.

Connect iPhone to Rockspace extender

• Firstly grab your iPhone and then go to the Home screen, click the Settings icon.
• Now go to Wi-Fi and make sure your Wi-Fi is turned ON.
• Then click on the router’s network name from the list.
• Here you need to enter the router’s wireless security key or password and click Join.  
  NOTE:  In case you have an unsecured wireless network, then your iOS devices will automatically connected.
• Lastly, your iPhone is now connected to your wireless network as shown by the checkmark behind the SSID.
• In case you encounter with error message “Incorrect password”, then click on Dismiss and re-enter your password correctly.

NOTE:  Wireless security key or password is case-sensitive.

This is the best way to connect your iPhone with the Rockspace extender. We hope this article helped you to connect your iPhone to the Rockspace range extender.

The post How to connect iPhone to Rockspace Extender? appeared first on Re.Rockspace.local.

ROCKSPACE WIFI RANGE EXTENDER are the easiest and fastest way to extend the range of your existing WIFI.

Follow these given steps to connect your ROCKSPACE WIFI RANGE EXETNDER to your phone or laptop:

• Firstly, turn off your mobile network before connecting.
• Then, plugin the WIFI extender into an electric socket.
• After that, wait till the indicator stays solid on.
• Now, open up WIFI on your android, iPhone or laptop.
• Choose ROCKSPACE WIFI EXTENDER to connect.
• Open up the web page after successful connection enter re.rockspace.local setup the password of the WIFI extender.
• Now, find the existing WIFI network that you wish to extend then, type on the existing WIFI network.
• Finally, it is successfully connected.
• Now you can relocate it on a place where the networks are not so good (dead zone area) or a place where you want to extend your network.

DEFAULT LOGIN TO ROCKSPACE WIFI RANGE EXTENDER

Before going to the configuration of the extender device you must know the login credential for your ROCKSPACE booster device to easily access settings and manage quickly. As, you can also find the default Login IP address, usernameand password printed to ROCKSPACE Sticker as well as a quick user manual included with the box.

Default Login URL– re.rockspace.local OR IP Address – 192.168.10.1

Default Username– NA

ROCKSPACE password– you have to create a new password for first time login.

When, everything is ready with you to setup a range extender device now the time to continue next steps.

Open your WEB BROWSER and access re.rockspace.local or 192.16810.1 and wait to load login page. Now you have to create a new login password for the range extender during first time setup. So, use a strong login passcode and then press the next button.

The post How To Connect Rockspace Wifi Extender appeared first on Re.Rockspace.local.

This extender comes up with many characteristics which are as follows:

• Permanent Signal Connection.
• Complete Signal Coverage.
• Compatible with every sort of router.

Apart from all these, you can locate a definite spot just with the help of the smart signal indicator. You can connect the extender through Graphical User Interface(GUI) or WPS connection. Rockspace wireless extender supports the dual-band technology that is 2Ghz to 5Ghz. And this extender also has a warranty which is a good thing for customers. Let’s start the Rockspace Repeater setup:

1. Firstly you need to plug in Rockspace AC750 Extender into power it via an electrical AC outlet.
2. After that connect your extender to the close power AC outlet.
3. Once done connect your wifi device to extender’s wifi network and make sure that mobile data of your device should not be turned on.
4. Now open any web browser on your device and in the address bar enter the URL http://re.rockspace.local or type 192.168.0.254.
5. Here you need to create the login username and password or you can choose a default username then select the wifi network that needs to be extended.
6. Enter the wifi password and hold on till the extender starts appearing.
7. Once the Setup RSD0607 Rockspace Extender is done reposition the extender in between the router and dead area.
8. When it spots the coverage you will get to know about it via an LED indicator which will turn blue.

Rockspace AC750 Repeater setup via WPS

• To Setup Rockspace AC750 Extender first, you need to plugin into any power socket which is nearer to the router.
• When LED starts lighting blue then you can start with the setup process.
• After the LED indicator starts lightning press the WPS button of the router.
• Within two minutes of pressing the WPS button of the router press the WPS button of Extender as well and check if the LED signal turns blue or red.
• Relocate the Rockspace extender in between the router and dead spot and check the coverage strength with an LED indicator.
• Once you get the full coverage strength then you can freely use your network without any disturbance.

Rock Space AC750 RSD0607 extender as an Access Point

• First, you need to plug into the electrical power outlet Setup AC750 Rockspace Extender.
• Connect your router and extender via good quality ethernet cable.
• Open the web page and visit 192.168.0.254 or type the URL http://re.rockspace.local and from the menu select the option mode.
• Last but not least set up an SSID and Password.

Features of Rock Space AC750 extender

Rockspace AC750 extender has multiple new features which make it unique and compatible as mentioned below:

1. Steady signal connection with dual-band technology
2. Compatible with almost every router.
3. Consists of dual antennas which raises signal coverage.
4. It can be easily set up through the WPS button or web user interface.
5. Smart signal LED indicator that supports in finding accurate spots.

The post How to Setup Rockspace AC750 Extender? appeared first on Re.Rockspace.local.

• The very first step is you make sure that you have the SSID and password of the main WiFi router. Then plug in the Re.rockspace.local to the power outlet.
• Once done then by enter 192.168.0.254 or Re.rockspace.local search for the default IP address of the extender.
• After that fill in the login details by adding admin and password then available networks will displayed on the screen & choose the main network from the available networks.
• Now just follow the instructions which will displayed on the page & by doing so, the extender will connected to the router successfully.

Once the Rockspace WiFi extender setup is done then you can connect your extender with Alexa. For this, you first need to have Amazon Alexa & you can find it on alexa.amazon.com.

Before starting the process, Plugin your Amazon Alexa to the power outlet then open the Alexa App.

Steps of Alexa with Rockspace WiFi extender setup:

• Open the settings from the navigation panel of Alexa App then set up a new device.
• After that press and hold the action button for a few seconds until the light starts blinking after this & then your mobile phone or tablet will connect to Alexa.
• A list of WiFi networks will show on your Alexa app.
• You need to select the modem’s WiFi network. The name & password of the modem’s WiFi network will show on modem/router then enter the password.
• In case, your modem’s WiFi network is not visible to you then scroll down & re-scan.
• Once the network visible to you connect it, Alexa, to the modem. After the connection, you will get the confirmation message & you are good to go for using Alexa.

The post How to connect Alexa with Rocksapce Extender? appeared first on Re.Rockspace.local.

Steps to Connect Rockspace extender with the Amazon Firestick-

In the Firestick menu, you need to navigate to the “Settings” option. To see how you can use the remote to navigate, have a look at the option shown in the picture.

Under the settings menu, you’ll see 3 ways to connect the Firestick to the WiFi. You can choose any one of them. The options are shown in the picture.

• See All Network
• Then Join Network using WPS (button)
• Join Network using WPS (PIN)
• Join Other Network

See All Network-

• In this option, you’ll see all the WiFi networks available at your location.
• Choose your home WiFi and hit the connect option.
• It will require your WiFi password. Once you connected to the home WiFi or Rockspace extender setup WiFi, you can start using your Firestick online.

Join Network using WPS (button)–

• To use this option on your Amazon Firestick menu, you need to press the physical button on the Rockspace Extender.
• On the Rockspace AC1200 Extender, and Rockspace AC750 Extender you’ll find the WPS button on the front side marked as “WPS”.
• In this method, you don’t need to put any WiFi password manually. The Firestick collects the required information to connect with the Rockspace extender automatically.

Join Network using WPS (PIN)

• To Connect with WPS (PIN) Method you need the WPS PIN mentioned on the Rockspace extender.
• Enter the PIN and press the WPS on the Rockspace Extender.
• Wait for 2 minutes for a successful connection.
• You’ll see a success message on your TV screen.

The post How to connect Rockspace extender with the Firestick? appeared first on Re.Rockspace.local.