Worried that why always prompt failure while extending. Don’t worry; we will help you out with the best solution to resolve this issue. Must read this full article it will help you to solve it. Firstly, you need to check the indicator is blue/red/not bright.
Note: In case the indicator is not bright that means failed matching. Once done checking this then follow the beneath procedure to solve this failure issue.
Here if you can’t find a superior signal while extending, then try the beneath solutions:
1. First you need to set the SSID of the router and repeater to numbers and letters combination;
2. Then place the repeater nearer to the router;
3. After that ensure the encryption mode of the superior signal should not be WEP.
Note: Only no encryption, WPA-PSK, WPA2-PSK, or their mixed mode is supported by our repeater)
4. Now make sure the superior signal should not be turned off or hidden.
5. Here you need to log in to the interface of the router to confirm if restrictions are made, like MAC filter, and Blacklist.
6. Also check the password of the superior router that you have entered must be correct.
7. Further modify the signal username and password for the superior router and then reset the repeater.
This is the best solution to this issue. We hope this article helped you to solve this issue.
