In this article, we will discuss whether the indicator shows red or no light it is weak or fled connecting. We will provide you the brief information that you will get to know about this issue.
1. Firstly, you can search the signal to see if there is a repeater factory SSID (If the SSID of the signal is still the factory setting, then it means a failed extension.)
2. Then, identify the exact color and status of the indicator by darkening the surrounding.
3. After that, log in to the interface of the repeater to see if the extended state is extended.
4. If you are sure that the extension is successful, you can keep the antenna upward and parallel with the antenna of the router; If not, please replace its angle.
5. You can put the repeater and router nearer, and identify if the indicator gets solid blue.
I can find someone else’s Wi-Fi signal, but I can’t find mine?
Here is the solution for this
1. Firstly, you have to check the signal strength that your mobile advice can get in a similar spot. (Maybe the signal in this place is poor)
2. Moreover, you should check if the encryption of the superior router is WEP. Only no encryption, WPA, WPA2, and mixed-mode can be supported by this repeater.
3. Whether the superior signal is hidden; (You can check this on your mobile.
