Confused about the LED behavior on your Repeater? When indicator shows red or no light what that means, either weak signal or fled connecting? How to confirm a successful extension? We know you all have this type of question with you. Don’t worry we will help you out. Must read the full article carefully it will resolve What do the lights mean on Rockspace Repeater.
1. Firstly you need to search the signal to check if there is a repeater factory SSID.
Note: In case the SSID of the signal is still the factory setting, then that means it is a failed extension.
2. Now you can observe the exact same color and status of the LED indicator by darkening the surround. (You need to look into a dark place like a room)
3. After that log in to the interface of the repeater to check if the extended state is extended.
4. Here if you are fully sure that the extension is successful, then only you can position the antenna in an upward direction and parallel to each other with the antenna of the router.
Note: In case not, then please reposition its angle.
5. Finally now you can place the repeater and router near each other and observe if the LED indicator turns to solid blue.
Here this is finally done.
We hope this article helped you to solve your issue.
