In our modern world, where digital connectivity is vital, having a robust and dependable Wi-Fi connection is key to ensuring uninterrupted internet access on numerous devices. Unfortunately, Wi-Fi signals often diminish as they travel, leading to zones in your home or workplace that suffer from weak or non-existent signal. To combat this, consider using a Wi-Fi range extender. A prime example is the Rockspace AC2100 Dual-band Wi-Fi Range Extender. This device excels in broadening your Wi-Fi network’s reach, effectively banishing any dead spots and guaranteeing uniform coverage across your area.

Setting up your Rockspace AC2100 Dual-band Wi-Fi Range Extender can be a straightforward process. Here’s a step-by-step guide to help you get started:

Pre-Installation

1. Location: Before installation, find an optimal location for your extender. It should be about halfway between your router and the area with weak Wi-Fi coverage. Ensure the location is within the wireless range of your router.
2. Power Supply: Plug the extender into a power outlet. Wait for the power LED to light up. It may take a minute for the extender to boot up.

Installation Steps

Using WPS (Wi-Fi Protected Setup):

1. WPS Button on Extender: Press the WPS button on the extender for about 2 seconds. The WPS LED should start blinking.
2. WPS on Router: Within two minutes, press the WPS button on your router. The extender will automatically begin connecting to your router’s Wi-Fi network.
3. Confirmation: Once connected, the WPS LED on the extender will turn solid, indicating a successful connection.
4. Relocation: You may need to relocate the extender for optimal performance after setup. If the signal LED is red or weak, move the extender closer to the router.

Using a Web Browser:

1. Wi-Fi Connection: Connect your computer or mobile device to the extender’s Wi-Fi network. The default network name (SSID) should be “Rockspace_EXT,” or something similar. No password is required initially.
2. Access Extender Settings: Open a web browser and enter the URL provided in the extender’s manual (commonly something like http://re.rockspace.local or a specific IP address).
3. Setup Wizard: Follow the on-screen instructions. You will need to choose your region, set up an admin password for the extender, and select the Wi-Fi network you wish to extend.
4. Wi-Fi Details: Enter the Wi-Fi password of your existing network when prompted.
5. Finalize Setup: Complete the setup by following any additional on-screen instructions. Once finished, the extender will reboot and apply the settings.

Post-Installation

• Placement: After setting up, place the extender where it can provide the best extending performance. Avoid physical obstructions and interference sources.
• Testing: Check the extended network by connecting devices to the extender’s network and testing the internet connection in areas where coverage was previously weak.
• Adjustments: If necessary, you can log back into the extender’s settings to adjust configurations like SSID, password, or firmware updates.

Tips

• Ensure your router’s firmware is up to date for the best compatibility.
• The extender’s SSID can be different from your router’s to easily distinguish between networks.
• In case of any issues, consult the user manual or Rockspace support for troubleshooting tips.

The post How to setup Rockspace AC2100 Dual-band Wi-Fi Range Extender? appeared first on Re.Rockspace.local.

We’ve listed the possible situations and how to fix them below.

No Signal Light on Rockspace extender-

In this case, if you don’t have a solid signal light on the extender, the possible reason is that it’s disconnected from the router. It happens when you make any changes in the router configuration, firmware update, or change the wifi password. Below are the step-by-step troubleshooting steps for all possible reasons.

1. Try to power cycle your router and extender if you haven’t done a firmware update on the router or extender. 
2. If you have changed the main WiFi password, you have to reset your Rockspace extender and reconfigure it with the new password. If you don’t know how to RESET Rockspace extender, try to read this article “RESET Rockspace extender“.
3. Make sure the extender isn’t plugged into a surge protector. 

Red Light on the Rockspace Extender-

If you have a red light on the Rockspace extender, that means it has a connectivity issue. It happens when your Rockspace extender is not able to receive a wifi signal from the main router or you have so many walls in between the router and extender. 

Try the following troubleshooting steps to resolve this issue.

1. Try to plug the extender into the wifi range. They vary from model to model in how much distance they can cover. Check the manual and place your extender accordingly. 
2. Check the router’s WiFi channel settings. Increase or set the channels to Auto mode.
3. Try to update the firmware of your router for better performance. 

Blinking lights on Rockspace extender-

If your Rockspace extender is showing blinking lights continuously, it means it’s either a hardware issue or due to some corrupted firmware update. The reason behind the corrupted firmware update is that your extender powers off during the firmware update. 

Try the troubleshooting steps below to fix this problem.

1. Try to RESET your Rockspace extender. Push the Reset button for 20 seconds while it is plugged into the power. 
2. Try to update or reinstall the firmware. 
3. If your device is still covered under warranty, try to replace it. 

The post How Do I Fix My Rockspace Extender not Working Issue? appeared first on Re.Rockspace.local.

This article will be able to resolve the issue many customers face in getting the “Rock Space login screen”. It usually happens when users mistype the login URL or search for “rackspace login” instead of “rockspace login”. 

So, in order to resolve the issue, make sure you complete the steps outlined below.

Rockspace Extender Login:

To access the Rocksace Login page, ensure that you are using the right web URL. “Re.rockspace.local” is the proper URL. This link may only be used for the new Rockspace Extender. You can’t access the Rockspace extender setup or admin page after it’s linked to the router. log in to the router admin page to get the IP address assigned to the Rockspace extender. You can use the IP address to get to the admin page. 

Rockspace Extender Default Password:

Once you are able to get to the login screen, you will be prompted for the default username and password. Many users are stuck on this step as they are not aware of the Rockspace Extender default password. They usually type in the wifi password, which is incorrect. The default username and password for Rockspace extender is “admin”. Once you enter the default password, click the login button, and you will be logged in to the Rockspace setup page. It is suggested to change the default username and password as soon as possible after a successful setup. 

FAQ

The post How to Get to the Rock Space Login Screen? appeared first on Re.Rockspace.local.

Install the RS Wi-Fi App– Download the RS Wi-Fi App on your mobile devices by searching for RS Wi-Fi in App store/Google play, or by scanning the QR code. At that point, install the App.

RS Wi-Fi App

Setup the primary mesh mode– The first mode you set up functions as the essential mode, while the rest areas the secondary nodes. If it’s not too much trouble power on one Mesh first connects the other Mesh after you set the first Mesh to the internet on the Apps.

1. Firstly you need to power off your modem and then expel its battery (if there is any).
2. After that use the included Ethernet cable to connect a LAN port of your modem or the Ethernet jack to the (WAN/LAN) port of any node. This node is the primary node.
3. Now Reinstall its battery and power on your modem.
4. Lastly use the included power connector to connect the essential node to a power source, its LED indicator lights will turn green and flicker rapidly.

Hold up about 40 seconds, which demonstrates the system has completed startup. Until the LED indicator flickers green slowly.

Connect the primary node to the internet

• Go to the Wi-Fi network list on your mobile device, select the SSID of the essential node, and enter its password. The SSID and password are determined on the bottom label of any node.
• Run the RS WI-FI App and adhere to the on-screen directions to address the essential node to the web. After the essential node is associated with the web, its LED indicator lights solid green.

Setup the first Rockspace mesh node on App–

1. Run the RS Wi-Fi application. The setup wizard appears. Tap “setup”
2. Consequently recognizes your web association type. Enter data as indicated by the web association type and “Next”. The work unit is associated with the web and the application continues to the following stage.
3. If your Internet association type is PPPoE, Enter your PPPoE user name and password and tap “Next”.

In the event that your web association type is dynamic IP, tap “Next”.

4. Set the wireless network name and password of the mesh unit and tap “OK”.

Note: If you change the wireless network name and password and tap “OK”,   your mobile phone will disconnect with the Rockspace mesh WI-FI network. You have to reconnect to the new wireless network you configured.

5. When the LED of the first mesh unit turns solid green, the mesh unit is associated with the web.

Connect the secondary Rockspace nodes to the internet–

1. Spot each node:

– At a high and open territory.

– Make sure that the wall between any two nodes is less than two.

– Keep your nodes away from electronics with solid obstruction, for example, microwave oven, induction cooker, and refrigerators.

2. Utilize the other power adapters to connectors to associate the remaining secondary nodes to power sources, their LED indicators light solid green. Wait about for 40 seconds. The secondary node is associated with another node when its LED indicator flickers green.

3. Watch the LED indicator of the secondary nodes until their LED indicators light one of the accompanying colors:

Solid green     -    Good Connection
Solid Yellow    -    Fair Connection
Solid Red       -     Disconnectd

4. In the event that a node’s LED pointer does not light solid green, migrate it as indicated by step 1 in V to get it better associated.

To get to the web login

– Wired devices: Connect wired devices to the LAN ports of your nodes.

– Wireless devices: Connect wireless devices to the WI-FI network utilizing the SSID and WI-FI password you set.

On the off chance that you need to manage the network anytime anyplace, tap and utilize your Rockspace account to log in.

The post How to setup Rockspace Mesh WiFi System? appeared first on Re.Rockspace.local.

To Setup Rockspace AC1200 Wi-Fi Range Extender eliminates dead spots in your home by increasing the router’s Wi-Fi signal and extending coverage up to 7,500 Sq. Ft. The Rockpsace AC1200 features Cross-Band Technology, which receives information on one band and transmits on another, resulting in a stronger, more consistent signal throughout your home. Range extender easily connects to your current network.

Dual Bands (2.4 and 5 GHz bands)

Using any mobile device, Spot Finder Technology shows you where to place range extender for optimal performance. It comes with Wi-Fi Audio through which you can connect a stereo system or speakers to range extender and instantly stream music from your smart device or computer.

It can work with any router means no need to modify router settings. The Simultaneous Dual Bands (2.4 and 5 GHz bands) reduces traffic and maximize the internet speed and offer up to 300Mbps data transfer on each band.

 

The Rockspace AC1200 can be setup by following the steps mentioned below:

• Firstly, To start the setup, you need to have the SSID and Wi-Fi password of the main router network. Then you need to plug in the Re.Rockspace extender to the working power outlet.
• Secondly, To start the setup, you need to have the SSID and Wi-Fi password of the main router network. Then you need to plug in the Rockspace AC1200 extender to the working power outlet.
• After joining the setup, open any browser in your device and search for the default IP address by typing 192.168.10.1 or re.rockspace.local.
• Now login by typing admin as the password and after this the device will perform a scan for the networks available. Out of these networks, select the main Wi-Fi network.
• Now follow the instructions given on the page through which the extender will be connected to the router network successfully.

Note:- You can also call on the Technical Support helpline for further assistance.

The post How to Setup Rockspace AC1200 extender? appeared first on Re.Rockspace.local.