Welcome to our comprehensive guide on effortlessly logging in to your Rockspace WiFi router. As proficient experts in networking and router configuration, we understand the significance of providing a seamless user experience when it comes to managing your network settings. In this article, we will provide you with step-by-step instructions to access the login page of your Rockspace WiFi router and make any necessary changes to optimize your network performance.

Before we delve into the login process, there are a few prerequisites you must fulfill:

1. Ensure your computer or mobile device is connected to the Rockspace WiFi network. Locate the WiFi icon on your device and select the appropriate network name (SSID) associated with your Rockspace router.
2. Make sure you have a compatible web browser installed on your device. For the best experience, we recommend using the latest versions of popular browsers such as Google Chrome, Mozilla Firefox, or Microsoft Edge.

Step 1: Find the IP Address of Your Rockspace Router

 To initiate the login process, you need to determine the IP address of your Rockspace WiFi router. The IP address serves as the gateway to access the router’s administration panel. Follow these steps:

1. Open your preferred web browser.
2. In the address bar, type the default IP address used by Rockspace routers. The most common IP addresses are “192.168.1.1” or “re.rockspace.local” Press Enter.
3. If the above-mentioned IP addresses don’t work, you can find the correct IP address by referring to the user manual or checking the manufacturer’s website for your specific Rockspace router model.

Step 2: Access the Router’s Login Page

Now that you have obtained the correct IP address, you can proceed to access the login page of your Rockspace WiFi router. Follow these instructions:

1. In your web browser’s address bar, enter the IP address obtained in the previous step and press Enter.
2. You will be redirected to the login page of your Rockspace router. Here, you need to provide your login credentials to proceed. By default, the username and password are often set to “admin” or mentioned in the user manual. Enter the required information and click the “Login” button.

Step 3: Configure Your Router Settings

Congratulations! You have successfully logged in to your Rockspace WiFi router. Now, let’s explore some essential settings you can configure to optimize your network:

1. Change WiFi Network Name (SSID) and Password To enhance network security and personalize your WiFi network, consider changing the default SSID and password. Follow these steps:

1. Locate the “Wireless” or “WiFi” settings section in the router’s administration panel.
2. Look for the options to change the network name (SSID) and password. Enter your desired values and save the changes.

2. Set Up Guest Network If you frequently have visitors or want to keep your main network separate, setting up a guest network is a useful feature. Here’s how you can do it:

1. Access the “Guest Network” settings section in the router’s administration panel.
2. Enable the guest network and configure the desired network name (SSID) and password.

Also Read- Firmware update of Rockspace Extender

Update Firmware

Regularly updating your router’s firmware is crucial to ensure optimal performance and security. Here’s how you can update the firmware:

1. Visit the official Rockspace website or the manufacturer’s support page.
2. Locate the firmware section and download the latest firmware file for your specific router model.
3. Access the “Firmware Update” or “System Update” settings section in the router’s administration panel.
4. Upload the downloaded firmware file and initiate the update process.

Port Forwarding

If you require specific applications or services to be accessible from the internet, configuring port forwarding can be beneficial. Follow these steps:

1. Access the “Port Forwarding” or “Virtual Server” settings section in the router’s administration panel.
2. Add a new rule by specifying the desired external and internal ports, as well as the IP address of the device you want to forward the ports to.

The post How to Easily Log In to Your Rockspace WIFI Router appeared first on Re.Rockspace.local.

To keep your stream uninterrupted, it’s critical to pick a good gadget. Though, it might be a difficult task at times. However, there are numerous router devices to choose from, making the decision complicated. wait! Have you decided on the ROCKSPACE AC2100 WIFI ROUTER as your router? Great! You’ve chosen a wise choice. Here’s where you can get a ROCKSPACE AC2100 router setup.

So, let’s double-check your ROCKSPACE AC2100 WIFI router decision. You will learn every detail regarding the device in this group of sentences. Please have a look. The ROCKSPACE 2100 smart WIFI router is ideal for a medium-sized household network blanket. The installation of the wireless WIFI router is quite straightforward.

The rockspace ac2100 manual designed for high-traffic environments. The design of the router reveals a lot about the router’s owner. The four reception kits work together to interact with various devices, and the entire switch small and stable enough to placed on a counter, rack, or anywhere else that convenient for your WIFI requirements. Take a look at the features it has to offer.

ROCKSPACE AC2100 DUAL-BAND WIFI ROUTER FEATURES

• MORE DEVICES WITH MU-MIMO

The MU-MIMO design acts as a sturdy guard, ensuring a reliable connection from everywhere in the house.

There are no stutters, lags, drops, or interruptions.

• BEAMFORMING

The AC2100 WIFI switch for gaming’s beamforming design concentrates remote signals on a single path on connected devices, resulting in more consistent and stable signal delivery.

• EASY SETUP AND APP CONTROL

The RS WIFI application could used to manage this intelligent WIFI switch. You can control your gadgets from far away and track them remotely. On this application, any capacity can used.

• ONE NAME ONE PASSWORD

The AC2100 double band switch, which combines 2.4G and 5G, provides two repeat groups but only has one SSID. As a result, it will link your gadgets with the faster ones.

• NETWORK SECURITY

WPA-PSK and WPA2-PSK remote security protocols, as well as firewalls, are provided to keep outsiders and programmers out of your network. Black &white recordings are also available.

• TIMER SWITCH AND POWER SAVING

This WIFI net switch stands out for its energy-saving capabilities, which allows it to save a significant amount of energy by identifying when it’s time to take a rest and convert to sleeping mode. If you can’t stand the flashing blue light while sleeping, you may turn off the board light using the app.

HOW TO SETUP ROCKSPACE ROUTER AC2100 WITH MODEM

ROCKSPACE WIFI routers have become more popular as a result of their range, durability, and high performance, as well as their excellent connectivity. To setup ROCKSPACE WIFI extender and connect devices using the WIFI password, please follow the procedures outlined below.

To make the installation and configuration procedure go as smoothly as possible, a few things are necessary. Please set aside 5 minutes before beginning the router setup procedure to collect these data.

Note: This approach may used to set up nearly any series and model of ROCKSPACE WIFI router, including the ax1800 and AC2100 dual-band routers. It’s important to understand the distinction between a router and an extension. Please see our user guide on ROCKSPACE extender setup and configuration if you have a ROCKSPACE extender.

REQUIREMENT FOR ROCKSPACE ROUTER SETUP

You must have an internet service provider who supplies you with a modem that can be connected to a ROCKSPACErouter for wireless internet because the router does not have its own internet connection. Please unbox the ROCKSPACE router and save any included configuration cards.

• The default IP address of a ROCKSPACE WIFI router may be found on the router’s bottom label, and it’s usually 192.168.1.1.
• a computer or smartphone with a complete internet browser, such as Safari, Google Chrome, or Firefox, to connect to the router console a power outlet to connect the WIFI router to the modem.
• additional Ethernet cable (optional but useful while troubleshooting).

INSTALL ROCKSPACE WIFI ROUTER

1. Using the internet cable included with the router, connect the modem’s internet port to the router’s WAN port (usually yellow port).
2. Connect the router to a power socket and switch it on. Make sure the modem is properly turned on and connected to the internet provider.
3. Now go to your computer and open your browser, then type 192.168.1.1 in the address box and hit enter.
4. You may be routed to the ROCKSPACE router’s local web interface; if prompted, provide the default username and password.
5. If you have any more information on your WIFI configuration card, please input it.
6. The modem will recognise the router after you log in to the ROCKSPACE router panel, and the setup procedure will begin from there.
7. Please follow the onscreen steps to pick your preferred language and location, as well as agree to the terms of service.
8. Set the network name (SSID) to anything you like, create a strong WIFI password (encryption key), and choose WPA2-PSK as the security authentication method.
9. You may alternatively leave the guest network accessible but lock it down with a separate password for guest users.
10. Once you’ve finished configuring everything, save it and make sure the router firmware is up to current before exiting the page.
11. To connect to the network name, restart the router and enter the password you just generated.

Connect your devices rockspace wifi router:-

If your WIFI continues disconnecting or you have a poor signal across the home, this should repair it.

You can connect computers, phones, and printers to WIFI using the same password once all of the devices are linked. If the setup fails and you can’t connect your devices to the internet, reboot the rockspace wifi router and try again.

• You may also seek assistance from support and have a rockspace wifi router set up for you.
• Please leave a remark below if you require any more assistance with the rockspace router.

The post ROCKSPACE ROUTER AC2100 SETUP appeared first on Re.Rockspace.local.

ROCKSPACE ROUTER SETUP VIA RS WIFI APP

In this paragraph, Rock space AC2100 Router Setup instructions for IOS 11 mobile phones are provided below.

Get the RS Wi-Fi App on your phone or tablet before you begin. For this explanation, a cell phone is utilised.

• Join the switch’s Wi-Fi network with your cell phone. On the bottom mark, you’ll see the default Wi-Fi network info.
• The RS Wi-Fi application should now be open.
• So, the App will determine your affiliation type.

Enter your PPPoE user name and password if your Internet connection is PPPoE, and then click Next.

If your internet connection has a dynamic IP address, you can go to the next step.

If your internet service provider uses static IP, enter your IP address and any other information provided by your ISP, and then click Next.

• Firstly, Set the Wi-Fi Name and Password to your liking.
• Secondly, Accept the default.

Android phones will join to the Wi-Fi network you just configured when the Rockspace AC2100 Router Setup is complete.

iPhone customers must physically interact with the new Wi-Fi network. You may then use the RS Wi-Fi App to access the internet and manage your Wi-Fi network.

RS Wi-Fi App for iOS

RS Wi-Fi App for Android

Instructions for iPhones and Android phones running IOS 11 (and above).

Don’t forget to instal the RS Wi-Fi App on your phone or tablet.

• Open the RS Wi-Fi App and check to see if your device is connected to the Wi-Fi network.
• Swipe the QR code provided at the bottom of the switch after clicking Add Device.
• Wait around ten seconds after clicking Join.
• After you’ve successfully connected, choose your connection type.

Your connection type will be automatically detected by the app.If you have a PPPoE Internet connection, please provide your PPPoE user name and password and click Next.

Select Next if your internet connection is dynamic IP.

If you have a static IP connection, enter your IP address and another credential provided by your ISP and click Next.

• Create your own private Wi-Fi name and password.
• After you’ve set up the switch, go back to the App’s settings page and reconnect the Wi-Fi using your login and password.
• After you’ve completed your Wi-Fi connection and re-visited the App, select Control Now to deal with the changeover.

Wi-Fi is available. Password and Username

 

You’ll learn how to examine and change the Wi-Fi name and password of your router network in this section.

PROCEDURE:

• Open the RS Wi-Fi App and go to Tools >Wi-Fi Name and Password to get started.
• Personalize the Wi-Fi Name and Password.
• Select a security mode from the drop-down menu. The use of both WPA and WPA2 is recommended.
• Hide Wi-Fi Network is enabled. This step is entirely optional.
• Save is the last option.

The post ROCKSPACE AC2100 ROUTER SETUP appeared first on Re.Rockspace.local.

Install the RS Wi-Fi App– Download the RS Wi-Fi App on your mobile devices by searching for RS Wi-Fi in App store/Google play, or by scanning the QR code. At that point, install the App.

RS Wi-Fi App

Setup the primary mesh mode– The first mode you set up functions as the essential mode, while the rest areas the secondary nodes. If it’s not too much trouble power on one Mesh first connects the other Mesh after you set the first Mesh to the internet on the Apps.

1. Firstly you need to power off your modem and then expel its battery (if there is any).
2. After that use the included Ethernet cable to connect a LAN port of your modem or the Ethernet jack to the (WAN/LAN) port of any node. This node is the primary node.
3. Now Reinstall its battery and power on your modem.
4. Lastly use the included power connector to connect the essential node to a power source, its LED indicator lights will turn green and flicker rapidly.

Hold up about 40 seconds, which demonstrates the system has completed startup. Until the LED indicator flickers green slowly.

Connect the primary node to the internet

• Go to the Wi-Fi network list on your mobile device, select the SSID of the essential node, and enter its password. The SSID and password are determined on the bottom label of any node.
• Run the RS WI-FI App and adhere to the on-screen directions to address the essential node to the web. After the essential node is associated with the web, its LED indicator lights solid green.

Setup the first Rockspace mesh node on App–

1. Run the RS Wi-Fi application. The setup wizard appears. Tap “setup”
2. Consequently recognizes your web association type. Enter data as indicated by the web association type and “Next”. The work unit is associated with the web and the application continues to the following stage.
3. If your Internet association type is PPPoE, Enter your PPPoE user name and password and tap “Next”.

In the event that your web association type is dynamic IP, tap “Next”.

4. Set the wireless network name and password of the mesh unit and tap “OK”.

Note: If you change the wireless network name and password and tap “OK”,   your mobile phone will disconnect with the Rockspace mesh WI-FI network. You have to reconnect to the new wireless network you configured.

5. When the LED of the first mesh unit turns solid green, the mesh unit is associated with the web.

Connect the secondary Rockspace nodes to the internet–

1. Spot each node:

– At a high and open territory.

– Make sure that the wall between any two nodes is less than two.

– Keep your nodes away from electronics with solid obstruction, for example, microwave oven, induction cooker, and refrigerators.

2. Utilize the other power adapters to connectors to associate the remaining secondary nodes to power sources, their LED indicators light solid green. Wait about for 40 seconds. The secondary node is associated with another node when its LED indicator flickers green.

3. Watch the LED indicator of the secondary nodes until their LED indicators light one of the accompanying colors:

Solid green     -    Good Connection
Solid Yellow    -    Fair Connection
Solid Red       -     Disconnectd

4. In the event that a node’s LED pointer does not light solid green, migrate it as indicated by step 1 in V to get it better associated.

To get to the web login

– Wired devices: Connect wired devices to the LAN ports of your nodes.

– Wireless devices: Connect wireless devices to the WI-FI network utilizing the SSID and WI-FI password you set.

On the off chance that you need to manage the network anytime anyplace, tap and utilize your Rockspace account to log in.

The post How to setup Rockspace Mesh WiFi System? appeared first on Re.Rockspace.local.