To keep your stream uninterrupted, it’s critical to pick a good gadget. Though, it might be a difficult task at times. However, there are numerous router devices to choose from, making the decision complicated. wait! Have you decided on the ROCKSPACE AC2100 WIFI ROUTER as your router? Great! You’ve chosen a wise choice. Here’s where you can get a ROCKSPACE AC2100 router setup.

So, let’s double-check your ROCKSPACE AC2100 WIFI router decision. You will learn every detail regarding the device in this group of sentences. Please have a look. The ROCKSPACE 2100 smart WIFI router is ideal for a medium-sized household network blanket. The installation of the wireless WIFI router is quite straightforward.

The rockspace ac2100 manual designed for high-traffic environments. The design of the router reveals a lot about the router’s owner. The four reception kits work together to interact with various devices, and the entire switch small and stable enough to placed on a counter, rack, or anywhere else that convenient for your WIFI requirements. Take a look at the features it has to offer.

ROCKSPACE AC2100 DUAL-BAND WIFI ROUTER FEATURES

• MORE DEVICES WITH MU-MIMO

The MU-MIMO design acts as a sturdy guard, ensuring a reliable connection from everywhere in the house.

There are no stutters, lags, drops, or interruptions.

• BEAMFORMING

The AC2100 WIFI switch for gaming’s beamforming design concentrates remote signals on a single path on connected devices, resulting in more consistent and stable signal delivery.

• EASY SETUP AND APP CONTROL

The RS WIFI application could used to manage this intelligent WIFI switch. You can control your gadgets from far away and track them remotely. On this application, any capacity can used.

• ONE NAME ONE PASSWORD

The AC2100 double band switch, which combines 2.4G and 5G, provides two repeat groups but only has one SSID. As a result, it will link your gadgets with the faster ones.

• NETWORK SECURITY

WPA-PSK and WPA2-PSK remote security protocols, as well as firewalls, are provided to keep outsiders and programmers out of your network. Black &white recordings are also available.

• TIMER SWITCH AND POWER SAVING

This WIFI net switch stands out for its energy-saving capabilities, which allows it to save a significant amount of energy by identifying when it’s time to take a rest and convert to sleeping mode. If you can’t stand the flashing blue light while sleeping, you may turn off the board light using the app.

HOW TO SETUP ROCKSPACE ROUTER AC2100 WITH MODEM

ROCKSPACE WIFI routers have become more popular as a result of their range, durability, and high performance, as well as their excellent connectivity. To setup ROCKSPACE WIFI extender and connect devices using the WIFI password, please follow the procedures outlined below.

To make the installation and configuration procedure go as smoothly as possible, a few things are necessary. Please set aside 5 minutes before beginning the router setup procedure to collect these data.

Note: This approach may used to set up nearly any series and model of ROCKSPACE WIFI router, including the ax1800 and AC2100 dual-band routers. It’s important to understand the distinction between a router and an extension. Please see our user guide on ROCKSPACE extender setup and configuration if you have a ROCKSPACE extender.

REQUIREMENT FOR ROCKSPACE ROUTER SETUP

You must have an internet service provider who supplies you with a modem that can be connected to a ROCKSPACErouter for wireless internet because the router does not have its own internet connection. Please unbox the ROCKSPACE router and save any included configuration cards.

• The default IP address of a ROCKSPACE WIFI router may be found on the router’s bottom label, and it’s usually 192.168.1.1.
• a computer or smartphone with a complete internet browser, such as Safari, Google Chrome, or Firefox, to connect to the router console a power outlet to connect the WIFI router to the modem.
• additional Ethernet cable (optional but useful while troubleshooting).

INSTALL ROCKSPACE WIFI ROUTER

1. Using the internet cable included with the router, connect the modem’s internet port to the router’s WAN port (usually yellow port).
2. Connect the router to a power socket and switch it on. Make sure the modem is properly turned on and connected to the internet provider.
3. Now go to your computer and open your browser, then type 192.168.1.1 in the address box and hit enter.
4. You may be routed to the ROCKSPACE router’s local web interface; if prompted, provide the default username and password.
5. If you have any more information on your WIFI configuration card, please input it.
6. The modem will recognise the router after you log in to the ROCKSPACE router panel, and the setup procedure will begin from there.
7. Please follow the onscreen steps to pick your preferred language and location, as well as agree to the terms of service.
8. Set the network name (SSID) to anything you like, create a strong WIFI password (encryption key), and choose WPA2-PSK as the security authentication method.
9. You may alternatively leave the guest network accessible but lock it down with a separate password for guest users.
10. Once you’ve finished configuring everything, save it and make sure the router firmware is up to current before exiting the page.
11. To connect to the network name, restart the router and enter the password you just generated.

Connect your devices rockspace wifi router:-

If your WIFI continues disconnecting or you have a poor signal across the home, this should repair it.

You can connect computers, phones, and printers to WIFI using the same password once all of the devices are linked. If the setup fails and you can’t connect your devices to the internet, reboot the rockspace wifi router and try again.

• You may also seek assistance from support and have a rockspace wifi router set up for you.
• Please leave a remark below if you require any more assistance with the rockspace router.

The post ROCKSPACE ROUTER AC2100 SETUP appeared first on Re.Rockspace.local.

ROCKSPACE ROUTER SETUP VIA RS WIFI APP

In this paragraph, Rock space AC2100 Router Setup instructions for IOS 11 mobile phones are provided below.

Get the RS Wi-Fi App on your phone or tablet before you begin. For this explanation, a cell phone is utilised.

• Join the switch’s Wi-Fi network with your cell phone. On the bottom mark, you’ll see the default Wi-Fi network info.
• The RS Wi-Fi application should now be open.
• So, the App will determine your affiliation type.

Enter your PPPoE user name and password if your Internet connection is PPPoE, and then click Next.

If your internet connection has a dynamic IP address, you can go to the next step.

If your internet service provider uses static IP, enter your IP address and any other information provided by your ISP, and then click Next.

• Firstly, Set the Wi-Fi Name and Password to your liking.
• Secondly, Accept the default.

Android phones will join to the Wi-Fi network you just configured when the Rockspace AC2100 Router Setup is complete.

iPhone customers must physically interact with the new Wi-Fi network. You may then use the RS Wi-Fi App to access the internet and manage your Wi-Fi network.

RS Wi-Fi App for iOS

RS Wi-Fi App for Android

Instructions for iPhones and Android phones running IOS 11 (and above).

Don’t forget to instal the RS Wi-Fi App on your phone or tablet.

• Open the RS Wi-Fi App and check to see if your device is connected to the Wi-Fi network.
• Swipe the QR code provided at the bottom of the switch after clicking Add Device.
• Wait around ten seconds after clicking Join.
• After you’ve successfully connected, choose your connection type.

Your connection type will be automatically detected by the app.If you have a PPPoE Internet connection, please provide your PPPoE user name and password and click Next.

Select Next if your internet connection is dynamic IP.

If you have a static IP connection, enter your IP address and another credential provided by your ISP and click Next.

• Create your own private Wi-Fi name and password.
• After you’ve set up the switch, go back to the App’s settings page and reconnect the Wi-Fi using your login and password.
• After you’ve completed your Wi-Fi connection and re-visited the App, select Control Now to deal with the changeover.

Wi-Fi is available. Password and Username

 

You’ll learn how to examine and change the Wi-Fi name and password of your router network in this section.

PROCEDURE:

• Open the RS Wi-Fi App and go to Tools >Wi-Fi Name and Password to get started.
• Personalize the Wi-Fi Name and Password.
• Select a security mode from the drop-down menu. The use of both WPA and WPA2 is recommended.
• Hide Wi-Fi Network is enabled. This step is entirely optional.
• Save is the last option.

The post ROCKSPACE AC2100 ROUTER SETUP appeared first on Re.Rockspace.local.