The Rockspace local extender Mesh WiFi system is a powerful and flexible solution for expanding your home Wi-Fi network. With mesh technology, you can create a seamless and strong Wi-Fi network that covers every corner of your home. Here is how to set up your Rockspace local extender Mesh WiFi system:

1. Choose the location for your main router: The main router is the hub of your mesh network and should be placed in a central location in your home with a clear line of sight to other nodes.
2. Connect the main router to your modem: Connect the main router to your modem using an Ethernet cable. Plug the main router into a power source and turn it on.
3. Install the mesh nodes: Place the mesh nodes in other rooms in your home to extend the coverage of your Wi-Fi network. Make sure the nodes have a clear line of sight to the main router or another node. Connect the nodes to power and turn them on.
4. Connect your device to the main router: Connect your device (e.g., smartphone, tablet, or computer) to the main router’s Wi-Fi network.
5. Download the Rockspace app: Download the Rockspace app from the App Store or Google Play Store. Use the app to set up and manage your mesh network.
6. Log in to the app: Log in to the app using your Rockspace account. If you don’t have an account, you can create one from the app.
7. Add the mesh nodes: From the app, follow the steps to add the mesh nodes to your network. The app will guide you through the process of connecting each node to the main router.
8. Customize your network settings: From the app, you can customize your network settings, such as network name and password, and configure other features such as parental controls and guest networks.
9. Test your network: Once you have set up your mesh network, test it to make sure that all nodes are working correctly and that you have good Wi-Fi coverage throughout your home.

By following these steps, you can easily set up your Rockspace local extender Mesh WiFi system and enjoy fast and reliable Wi-Fi coverage in every room of your home.

How to Reset Rockspace local extender Mesh WiFi system?

Resetting your Rockspace local extender Mesh WiFi system is a simple process that can be done in a few steps. Here’s how to reset your Rockspace mesh network:

1. Locate the reset button: The reset button is usually located on the back of each mesh node.
2. Press and hold the reset button: Press and hold the reset button for 10-15 seconds. The LED lights on the node will start flashing, indicating that the reset process has begun.
3. Release the reset button: After 10-15 seconds, release the reset button. The node will restart and return to its default factory settings.
4. Repeat the process for all nodes: Repeat this process for each mesh node in your network.
5. Re-configure the network: After resetting all nodes, you will need to reconfigure the network by following the setup instructions described in the user manual or previous steps.

Note: If you’re resetting your mesh network because you’re having issues with your Wi-Fi, it’s a good idea to restart your modem and main router before reconfiguring the network.

By resetting your Rockspace local extender Mesh WiFi system, you can restore the network to its default settings and resolve any issues you may be experiencing. If you still have trouble with your mesh network after resetting it, you may need to contact Rockspace customer support for additional assistance.

The post How to Setup Rockspace local extender Mesh WiFi System? appeared first on Re.Rockspace.local.

Install the RS Wi-Fi App– Download the RS Wi-Fi App on your mobile devices by searching for RS Wi-Fi in App store/Google play, or by scanning the QR code. At that point, install the App.

RS Wi-Fi App

Setup the primary mesh mode– The first mode you set up functions as the essential mode, while the rest areas the secondary nodes. If it’s not too much trouble power on one Mesh first connects the other Mesh after you set the first Mesh to the internet on the Apps.

1. Firstly you need to power off your modem and then expel its battery (if there is any).
2. After that use the included Ethernet cable to connect a LAN port of your modem or the Ethernet jack to the (WAN/LAN) port of any node. This node is the primary node.
3. Now Reinstall its battery and power on your modem.
4. Lastly use the included power connector to connect the essential node to a power source, its LED indicator lights will turn green and flicker rapidly.

Hold up about 40 seconds, which demonstrates the system has completed startup. Until the LED indicator flickers green slowly.

Connect the primary node to the internet

• Go to the Wi-Fi network list on your mobile device, select the SSID of the essential node, and enter its password. The SSID and password are determined on the bottom label of any node.
• Run the RS WI-FI App and adhere to the on-screen directions to address the essential node to the web. After the essential node is associated with the web, its LED indicator lights solid green.

Setup the first Rockspace mesh node on App–

1. Run the RS Wi-Fi application. The setup wizard appears. Tap “setup”
2. Consequently recognizes your web association type. Enter data as indicated by the web association type and “Next”. The work unit is associated with the web and the application continues to the following stage.
3. If your Internet association type is PPPoE, Enter your PPPoE user name and password and tap “Next”.

In the event that your web association type is dynamic IP, tap “Next”.

4. Set the wireless network name and password of the mesh unit and tap “OK”.

Note: If you change the wireless network name and password and tap “OK”,   your mobile phone will disconnect with the Rockspace mesh WI-FI network. You have to reconnect to the new wireless network you configured.

5. When the LED of the first mesh unit turns solid green, the mesh unit is associated with the web.

Connect the secondary Rockspace nodes to the internet–

1. Spot each node:

– At a high and open territory.

– Make sure that the wall between any two nodes is less than two.

– Keep your nodes away from electronics with solid obstruction, for example, microwave oven, induction cooker, and refrigerators.

2. Utilize the other power adapters to connectors to associate the remaining secondary nodes to power sources, their LED indicators light solid green. Wait about for 40 seconds. The secondary node is associated with another node when its LED indicator flickers green.

3. Watch the LED indicator of the secondary nodes until their LED indicators light one of the accompanying colors:

Solid green     -    Good Connection
Solid Yellow    -    Fair Connection
Solid Red       -     Disconnectd

4. In the event that a node’s LED pointer does not light solid green, migrate it as indicated by step 1 in V to get it better associated.

To get to the web login

– Wired devices: Connect wired devices to the LAN ports of your nodes.

– Wireless devices: Connect wireless devices to the WI-FI network utilizing the SSID and WI-FI password you set.

On the off chance that you need to manage the network anytime anyplace, tap and utilize your Rockspace account to log in.

The post How to setup Rockspace Mesh WiFi System? appeared first on Re.Rockspace.local.