re rockspace local Archives • Re.Rockspace.local

How to Get to the Rock Space Login Screen?

Austin Parker — Wed, 08 Jun 2022 07:06:59 +0000

Rock Space Login

This article will be able to resolve the issue many customers face in getting the “Rock Space login screen”. It usually happens when users mistype the login URL or search for “rackspace login” instead of “rockspace login”.

So, in order to resolve the issue, make sure you complete the steps outlined below.

Rockspace Extender Login:

To access the Rocksace Login page, ensure that you are using the right web URL. “Re.rockspace.local” is the proper URL. This link may only be used for the new Rockspace Extender. You can’t access the Rockspace extender setup or admin page after it’s linked to the router. log in to the router admin page to get the IP address assigned to the Rockspace extender. You can use the IP address to get to the admin page.

Rockspace Extender Default Password:

Once you are able to get to the login screen, you will be prompted for the default username and password. Many users are stuck on this step as they are not aware of the Rockspace Extender default password. They usually type in the wifi password, which is incorrect. The default username and password for Rockspace extender is “admin”. Once you enter the default password, click the login button, and you will be logged in to the Rockspace setup page. It is suggested to change the default username and password as soon as possible after a successful setup.

FAQ

How do I log into my rock space extender?

You can log in to Rockspace extender using the default IP address and URL, i.e 192.168.0.254 & “re.rockspace.local“, in case it is brand new.

How do I change my Rockspace extender password?

To change the Rockspace Extender password, you have to login to the Rockspace admin page. After that, go to Administration and click Management. Now enter the password you want to set as your range extender password, re-enter the password and hit save.

How do I reset my Rockspace WiFi extender?

You may need to reset a RockSpace device if you’ve forgotten the admin password, if a firmware update failed, or if you want to make a new installation. When you reset the extender, the settings are reverted to factory defaults. This removes custom settings and requires reconfiguration. Only reset an extender if you know how to reconfigure it as a last option.
There are two methods for resetting the RockSpace extender.
1. Hard RESET
2. Soft RESET

Hard RESET
1. First, look for a small hole or a button that says “Reset” on the Rockspace wireless extender.
2. To push this button, use a paper clip.
3. Press and hold the button for 10 seconds, then let go when the LEDs on the front panel start to flash quickly.
4. Let the extender start up again.
5. The process of a hard reset is done.
After resetting, go to the Rockspace WiFi Extender Setup page to change the settings again.

Soft RESET
To use this method, you must log in to the Rockspace admin panel. Use re.rockspace.local or 192.168.0.254 to get to the Rockspace Wi-Fi extender login.
page.
1. Click on the settings button for the Rockspace extender.
2. Click on “Device Administration” and choose “Reset.” Just click on “Factory Reset.”
3. Once you click the “Reset” button, the process begins.
4. The status of the same thing will be shown on the screen.

When the process is done, the extender will restart, and you can change the settings again.

The post How to Get to the Rock Space Login Screen? appeared first on Re.Rockspace.local.

How to connect Rockspace extender with the Firestick?

Austin Parker — Mon, 03 Feb 2020 11:55:31 +0000

This article is about to connect Rockspace extender with the Firestick. Once you connect the Rockspace extender to the main router. All you need is the regular WiFi password, or if you setup a custom password for the extended WiFi, you can use that too.

Steps to Connect Rockspace extender with the Amazon Firestick-

In the Firestick menu, you need to navigate to the “Settings” option. To see how you can use the remote to navigate, have a look at the option shown in the picture.

Under the settings menu, you’ll see 3 ways to connect the Firestick to the WiFi. You can choose any one of them. The options are shown in the picture.

connect Rockspace extender

See All Network
Then Join Network using WPS (button)
Join Network using WPS (PIN)
Join Other Network

See All Network-

In this option, you’ll see all the WiFi networks available at your location.
Choose your home WiFi and hit the connect option.
It will require your WiFi password. Once you connected to the home WiFi or Rockspace extender setup WiFi, you can start using your Firestick online.

Join Network using WPS (button)–

Rockspace extender with the Firestick

To use this option on your Amazon Firestick menu, you need to press the physical button on the Rockspace Extender.
On the Rockspace AC1200 Extender, and Rockspace AC750 Extender you’ll find the WPS button on the front side marked as “WPS”.
In this method, you don’t need to put any WiFi password manually. The Firestick collects the required information to connect with the Rockspace extender automatically.

Join Network using WPS (PIN)

To Connect with WPS (PIN) Method you need the WPS PIN mentioned on the Rockspace extender.
Enter the PIN and press the WPS on the Rockspace Extender.
Wait for 2 minutes for a successful connection.
You’ll see a success message on your TV screen.

The post How to connect Rockspace extender with the Firestick? appeared first on Re.Rockspace.local.

How to Access the Login page of Rockspace extender?

Austin Parker — Sun, 26 Jan 2020 08:35:19 +0000

You can access the Login page of Rockspace extender once when it’s not setup using the default IP address 192.168.0.254 or http://Re.rockspace.local. But after installation the Default IP address will not work. So the question is how we can access the Login page in order to update the Firmware of the Rockspace extender or any other changes you want to do on the extender?

In this article we are going toearn how to access the login page after the installation.

Steps to Login on Rockspace Extender-

You need to login on the router page for example- If you have a Netgear, Comcast, Arries, Xfinity, Spectrum or any other brand router, you can access the login page of that router by typing the default IP in the web browser. Below i’m going to show how to access the login page of the router.

Open the Command Prompt of your computer.
Type command “ipconfig”
IP showing in front of the “default gateway” is your router’s access IP.

Once you login on the router page you need to find the Connected device list or DHCP list option. Under the connected device you need to find the IP for the Rockspace Extender. Using the IP address you can access the Login page for the Rockspace extender. Below is the example of Connected devices on TP-link router.

Rockspace-admin-page-login

The post How to Access the Login page of Rockspace extender? appeared first on Re.Rockspace.local.