Network is slow after extension

Austin Parker — Thu, 15 Oct 2020 16:05:10 +0000

Having issues if the network is slow after extension. In this article, we will teach you what to do if the network is slow after extension? We have a simple way to solve this issue. We will provide you with a better solution that you need to follow very carefully.

What to do if the network is slow after extension

Here is the solution to resolve this issue:

Firstly view the color of the indicator:
1. Solid blue: It indicates the signal strength received by the repeater is above -60db.
2. Solid red: Meanwhile the signal strength received by the repeater is above -61db~-74db. (The signal is a little bit weak. It is recommended to move the repeater nearer, and the repeater antenna is parallel to the router.)
3. No light: However, When no light the signal strength getting by the repeater is below -74db. (The signal is week. It is recommended to move the repeater nearer, and the repeater antenna is parallel to the router. )
4. in the other hand, when the signal strength that is getting by the repeater is between 40% and 79% (While the interface shows a signal with 2 bars), the repeater works better at this time.
5. Also Check the network speed when your device connects to the router directly at that position.

a. Moreover, when the network speed between the router and repeater is similar, it means the connection is good.
b. Most Importantly, When the network speed is quicker than that at the repeater, please check the following problems:
I. Firstly, check the placement of the repeater; avoid putting it in the corner;
II. Then, Check if the antenna of the repeater and router is paralleled, a paralleled antenna will be better for the connection.
III. Furthermore, if the above situation is excluded, kindly reset the repeater, and try it again.
IV. Moreover, reset the repeater.

The post Network is slow after extension appeared first on Re.Rockspace.local.

Lose the connection after Extension

Austin Parker — Thu, 15 Oct 2020 15:20:48 +0000

I. What to do if sometimes repeater and mobile device will lose their connection after Extension?

Having face issues when repeater and mobile device will lose their connection after Extension. In this article, we will teach you what to do if sometimes repeater and mobile device will lose their connection after Extension? We have the easiest way to solve this. We will give you the steps that you need to follow very carefully.

So, here are the steps that you have to follow to solve the issue:

Lose the connection after Extension

A. When the indicator turns no light, it implies the repeater and router are disconnected.

1. Firstly, verify if any changes have been made.
2. Secondly enter the router interface to view the history, and check out the status of the superior router.
3. If the router is good, judge the strength of the signal by the indicator’s color. You can adjust the area and the direction of the repeater.

b. When the indicator is solid blue

You can check if the SSID of the repeater contains special characters or Chinese commands you can set the SSID to an alphanumeric combination.

II. Unable to connect the repeater signal after a while of a successful extension?

To resolve this issue we will provide you with the following steps:
1. Firstly check out the interface for restrictions and blacklist.
2. Then clear the cache of the extended signal, and then reconnect.
3. After that repeater and set up it again.

Finally, you have successfully solved this issue.

The post Lose the connection after Extension appeared first on Re.Rockspace.local.

wifi extender Archives • Re.Rockspace.local

Network is slow after extension

Lose the connection after Extension