rocket wifi extender Archives • Re.Rockspace.local

What do the lights mean on Rockspace Repeater?

Austin Parker — Thu, 15 Oct 2020 07:01:25 +0000

Confused about the LED behavior on your Repeater? When indicator shows red or no light what that means, either weak signal or fled connecting? How to confirm a successful extension? We know you all have this type of question with you. Don’t worry we will help you out. Must read the full article carefully it will resolve What do the lights mean on Rockspace Repeater.

lights mean on Rockspace Repeater

LED status on Repeater

1. Firstly you need to search the signal to check if there is a repeater factory SSID.
Note: In case the SSID of the signal is still the factory setting, then that means it is a failed extension.
2. Now you can observe the exact same color and status of the LED indicator by darkening the surround. (You need to look into a dark place like a room)
3. After that log in to the interface of the repeater to check if the extended state is extended.
4. Here if you are fully sure that the extension is successful, then only you can position the antenna in an upward direction and parallel to each other with the antenna of the router.
Note: In case not, then please reposition its angle.
5. Finally now you can place the repeater and router near each other and observe if the LED indicator turns to solid blue.
Here this is finally done.

We hope this article helped you to solve your issue.

The post What do the lights mean on Rockspace Repeater? appeared first on Re.Rockspace.local.

Unable to login into Rockspace Repeater interface

Austin Parker — Thu, 15 Oct 2020 05:18:02 +0000

Unable login in Rockspace Repeater interface. There are so many of you out there who must have the issue of unable to login Rockspace repeater interface and also don’t know how to resolve this issue. Don’t worry; we will help you out with the best solution to resolve this issue. First we will understand the situation is for before or after the expansion. Alright, here we will discuss about both the terms before and after also.

Unable to login into the Rockspace Repeater interface

Steps to login to Rocspace Repeater interface

Before the extension:
1. Firstly make sure that you are connected to the correct signal of the repeater.
2. Also, ensure the domain name that you have entered in the address bar must be re.rockspacce.local or IP address 192.168.0.254.
Note: You need to be very careful while entering the spelling must be correct and the numbers.
3. Here in case you are unable to log in, we recommend closing your browser and trying again. In case you still face issues then please clear out all the cache or reboot your device.
4. If all the methods that we recommend are failed, then restore factory settings or recharge the plug in the socket and again try to log in.

After the extension:

There are two methods to solve this situation:

Methods: 1

1. Firstly ensure that you are connected to the right signal of the repeater.
2. Once you connected to the repeater wireless signal, then ensure the IP address of the repeater signal must be assigned by the superior router.
3. Finally login via re.rocksppace.local.
Note: If the last step doesn’t work then we recommend changing your device to log in.

Method: 2

1. Firstly ensure you have connected to the Wi-Fi signal and then log in to the interface of the router.
2. Now open the client list of routers to look who is connected.
3. Then finding the mac address of the repeater you can get the IP address of the extender assigned by the router.
4. Finally just open the browser and enter the IP address in the address bar, here enter the interface.
We hope this article helped you to resolve this issue.

The post Unable to login into Rockspace Repeater interface appeared first on Re.Rockspace.local.

How do I change my Rockspace extender password?

Austin Parker — Thu, 15 Oct 2020 04:37:10 +0000

There are so many who want to change Rockspace extender password for so many reasons. Also the main reason to change the password is for security purpose. To protect their network form others. While we using the range extender’s web-based setup page, there you see the login page will display prompt for a password. From company by default, range extender’s admin password is admin. We recommended changing it for security purposes. So must read the full article this will lead you to solve how to change your Rockspace range extender’s administrator password.

Rockspace extender

Accessing Rockspace extender settings

Before you can change your Rockspace extender password, you need to access the extender’s settings through a web browser. Follow these simple steps:

Connect to the Rockspace extender network:
- Locate the Wi-Fi network named “Rockspace” or something similar.
- Connect your device to this network.
Open a web browser and enter the default IP address:
- Open a web browser like Chrome, Firefox, or Safari.
- In the address bar, type the default IP address of your Rockspace extender. The default IP address 192.168.1.254 is usually mentioned in the extender’s manual or on the device itself.
Login using default username and password:
- Once you enter the IP address, you will be directed to the Rockspace extender login page.
- Enter the default username and password. These details can also be found in the manual or on the device.

Changing Rockspace extender password

Now that you have accessed the Rockspace extender settings, you can proceed with changing the password. Follow these steps:

Locate the “Settings” or “Administration” tab:
- After logging in, you will be presented with the extender’s settings interface.
- Look for a tab labeled “Settings” or “Administration.” Click on it to proceed.
Click on “Change Password”:
- Within the settings tab, you will find various options. Look for the “Change Password” option and click on it.
Enter the new password and confirm it:
- In the password change window, you will be prompted to enter the new password.
- Choose a strong and unique password and enter it in the designated field.
- Confirm the new password by entering it again in the confirmation field.
Save the changes and log out:
- Once you have entered the new password and confirmed it, click on the “Save” or “Apply” button to save the changes.
- After saving the changes, log out of the Rockspace extender settings interface.

Also Read- How to Setup Rockspace local extender Mesh WiFi System?

The post How do I change my Rockspace extender password? appeared first on Re.Rockspace.local.