Solid On – It means the repeater has started
Blinking- It refers to the repeater is starting
Off – Off refers to the repeater is not powered on.

On – It will show a WPS connection. It has established.
After that, Blinking– A WPS connection is being established
Off– It means the WPS function is disabled

Solid Blue- The repeater has connected to your existing Wi-Fi router/modem, and its position is proper.
Solid Red- It means the repeater is too far away from the router to relocate the repeater nearer to the router.
Off– Off represent the repeater does not connect to your Wi-Fi router.

1. Firstly you need to search the signal to check if there is a repeater factory SSID.
Note: In case the SSID of the signal is still the factory setting, then that means it is a failed extension.
2. Now you can observe the exact same color and status of the LED indicator by darkening the surround. (You need to look into a dark place like a room)
3. After that log in to the interface of the repeater to check if the extended state is extended.
4. Here if you are fully sure that the extension is successful, then only you can position the antenna in an upward direction and parallel to each other with the antenna of the router.
Note: In case not, then please reposition its angle.
5. Finally now you can place the repeater and router near each other and observe if the LED indicator turns to solid blue.
Here this is finally done.

We hope this article helped you to solve your issue.

1. Firstly grab your iPhone and then go to the Home screen, click the Settings icon.
2. Now go to Wi-Fi and make sure your Wi-Fi is turned ON.
3. Then click on the router’s network name from the list.
4. Here you need to enter the router’s wireless security key or password and click Join.  
NOTE:  In case you have an unsecured wireless network, then your iOS devices will automatically be connected.
5. Lastly your iPhone is now connected to your wireless network as shown by the checkmark behind the SSID.
6. In case you encounter with error message “Incorrect password”, then click on Dismiss and re-enter your password correctly.

NOTE:  Wireless security key or password is case-sensitive.
However, This is the best way to connect your iPhone with the Rockspace extender. We hope this article helped you to solve this issue.

Before the extension:
1. Firstly make sure that you are connected to the correct signal of the repeater.
2. Also, ensure the domain name that you have entered in the address bar must be re.rockspacce.local or IP address 192.168.0.254.
Note: You need to be very careful while entering the spelling must be correct and the numbers.
3. Here in case you are unable to log in, we recommend closing your browser and trying again. In case you still face issues then please clear out all the cache or reboot your device.
4. If all the methods that we recommend are failed, then restore factory settings or recharge the plug in the socket and again try to log in.

After the extension:

There are two methods to solve this situation:

Methods: 1

1. Firstly ensure that you are connected to the right signal of the repeater.
2. Once you connected to the repeater wireless signal, then ensure the IP address of the repeater signal must be assigned by the superior router.
3. Finally login via re.rocksppace.local.
Note: If the last step doesn’t work then we recommend changing your device to log in.

Method: 2

1. Firstly ensure you have connected to the Wi-Fi signal and then log in to the interface of the router.
2. Now open the client list of routers to look who is connected.
3. Then finding the mac address of the repeater you can get the IP address of the extender assigned by the router.
4. Finally just open the browser and enter the IP address in the address bar, here enter the interface.
We hope this article helped you to resolve this issue.