When indicator shows red or no light

Austin Parker — Thu, 15 Oct 2020 16:22:02 +0000

In this article, we will discuss whether the indicator shows red or no light it is weak or fled connecting. We will provide you the brief information that you will get to know about this issue.

First of all, we get to know how to confirm a successful extension?

1. Firstly, you can search the signal to see if there is a repeater factory SSID (If the SSID of the signal is still the factory setting, then it means a failed extension.)
2. Then, identify the exact color and status of the indicator by darkening the surrounding.
3. After that, log in to the interface of the repeater to see if the extended state is extended.
4. If you are sure that the extension is successful, you can keep the antenna upward and parallel with the antenna of the router; If not, please replace its angle.
5. You can put the repeater and router nearer, and identify if the indicator gets solid blue.

When an indicator shows red or no light

Other queries –

I can find someone else’s Wi-Fi signal, but I can’t find mine?
Here is the solution for this
1. Firstly, you have to check the signal strength that your mobile advice can get in a similar spot. (Maybe the signal in this place is poor)
2. Moreover, you should check if the encryption of the superior router is WEP. Only no encryption, WPA, WPA2, and mixed-mode can be supported by this repeater.
3. Whether the superior signal is hidden; (You can check this on your mobile.

The post When indicator shows red or no light appeared first on Re.Rockspace.local.

Lights mean on Rockspace repeater

Austin Parker — Thu, 15 Oct 2020 15:03:32 +0000

In this article, we will teach you what do the Lights mean on Rockspace repeater? We will provide you with a full description of this.

Rockspace local wi-fi extender refers to a repeater to boost the signal and prevent it from dead zone areas. However, re. rockspace local wi-fi extender works at 2.4G band thereby giving full signal coverage with a transmission speed of 300 Mbps.

RST Button– You can use the end of a paper clip or the same object to press down and hold up this button around about 8 seconds with power on, and then release it to restore the extender to factory resetting.

Lights mean on Rockspace repeater

1. Power LED

Solid On – It means the repeater has started
Blinking- It refers to the repeater is starting
Off – Off refers to the repeater is not powered on.

2. WPS LED

On – It will show a WPS connection. It has established.
After that, Blinking– A WPS connection is being established
Off– It means the WPS function is disabled

3. Moreover, Signal LED

Solid Blue- The repeater has connected to your existing Wi-Fi router/modem, and its position is proper.
Solid Red- It means the repeater is too far away from the router to relocate the repeater nearer to the router.
Off– Off represent the repeater does not connect to your Wi-Fi router.

The post Lights mean on Rockspace repeater appeared first on Re.Rockspace.local.

LLights mean on Rockspace repeater Archives • Re.Rockspace.local

When indicator shows red or no light

Lights mean on Rockspace repeater