If http://re.rockspace.local Doesn’t Load

• Try 192.168.0.254 in your browser’s address bar instead.​
• Make sure you’re connected to the Rockspace_EXT network.
• Try with another browser/device or clear your browser cache.

Quick Troubleshooting

• Extender not connecting?
  • Double-check your WiFi password for typos.
  • Place extender closer to the router for setup—then relocate.
• Setup page won’t open?
  • Confirm you’re connected to the extender’s WiFi (not your main network).
  • Use the IP address (192.168.0.254) if the local URL fails.
• Need to reset?
  • Find the reset button on your extender.
  • Press and hold it for 10 seconds. Wait for lights to blink, then retry the setup.

Your Rockspace extender should now be up and running. You can manage settings or change the WiFi password by revisiting the setup page anytime!

The post How to Setup Rockspace Extender Using http://re.rockspace.local appeared first on Re.Rockspace.local.

What is a Rockspace WiFi Extender?

A Rockspace wifi range extender is a plug-and-play device designed to repeat your home WiFi signal, extending coverage for all your wireless devices. It’s ideal for large homes, thick walls, or boosting WiFi to outbuildings and upper floors.

How to Set Up Your Rockspace WiFi Extender (Step-by-Step)

1. Plug in the Rockspace Extender
Insert your Rockspace extender into a power outlet halfway between your main router and the dead zone area. Wait for the power LED to turn solid.

2. Connect to the Rockspace Extender Network
On your phone or laptop, look for the new “Rockspace_EXT” WiFi network and connect.

3. Launch the Web-Based Setup Portal
Open a browser and enter http://re.rockspace.local or the default IP (192.168.0.254).
You’ll see the Rockspace WiFi extender setup page.

4. Follow the Setup Wizard

• Select your main WiFi network from the scan/displayed list.
• Enter your WiFi password carefully.
• Confirm and wait for the “Connection” or “Extended” status.

5. Reconnect to Your Main Network
Once setup is done, disconnect from Rockspace_EXT and connect to the new extended network.
Your Rockspace WiFi extender signal might appear as “HomeWiFi_EXT” or similar.

6. Position for Best Signal
Move the Rockspace extender for max coverage—green or solid LED usually means best placement!

Alternate Setup: WPS Button (Fastest Method)

1. Press the WPS button on your Rockspace extender.
2. Within 2 minutes, press WPS on your main router.
3. Wait for the extender’s LED to blink and turn solid—done!

Troubleshooting Your Rockspace Extender

• No Signal?
  Plug it closer to your router—thick walls can block the signal.
• Can’t Access Setup Page?
  Double-check you’re connected to the Rockspace_EXT network and use a browser in incognito/private mode.
• Slow Speeds?
  Place the Rockspace extender in the open, away from appliances and thick metal or glass.
• Reset Needed?
  Hold the Reset button for 10 seconds; re-do setup.

Real-World Tips from Users

• “After setting up my Rockspace extender, my backyard patio finally gets full bars—streamed a movie with zero buffering!”
• “Using the WPS button is so much faster for quick pairing.”
• “The web portal can be glitchy on my phone—works best on laptops!”

FAQs: Rockspace WiFi Extender

A Rockspace WiFi extender is the key to full-home internet coverage in 2025. Follow these setup steps and troubleshooting tips to maximize speeds and stay connected everywhere—no tech headaches required! For more guides and expert help, bookmark rerocklocal.com

The post Rockspace WiFi Extender: How to Set Up, Optimize, and Fix Issues in 2025 appeared first on Re.Rockspace.local.

In our modern world, where digital connectivity is vital, having a robust and dependable Wi-Fi connection is key to ensuring uninterrupted internet access on numerous devices. Unfortunately, Wi-Fi signals often diminish as they travel, leading to zones in your home or workplace that suffer from weak or non-existent signal. To combat this, consider using a Wi-Fi range extender. A prime example is the Rockspace AC2100 Dual-band Wi-Fi Range Extender. This device excels in broadening your Wi-Fi network’s reach, effectively banishing any dead spots and guaranteeing uniform coverage across your area.

Setting up your Rockspace AC2100 Dual-band Wi-Fi Range Extender can be a straightforward process. Here’s a step-by-step guide to help you get started:

Pre-Installation

1. Location: Before installation, find an optimal location for your extender. It should be about halfway between your router and the area with weak Wi-Fi coverage. Ensure the location is within the wireless range of your router.
2. Power Supply: Plug the extender into a power outlet. Wait for the power LED to light up. It may take a minute for the extender to boot up.

Installation Steps

Using WPS (Wi-Fi Protected Setup):

1. WPS Button on Extender: Press the WPS button on the extender for about 2 seconds. The WPS LED should start blinking.
2. WPS on Router: Within two minutes, press the WPS button on your router. The extender will automatically begin connecting to your router’s Wi-Fi network.
3. Confirmation: Once connected, the WPS LED on the extender will turn solid, indicating a successful connection.
4. Relocation: You may need to relocate the extender for optimal performance after setup. If the signal LED is red or weak, move the extender closer to the router.

Using a Web Browser:

1. Wi-Fi Connection: Connect your computer or mobile device to the extender’s Wi-Fi network. The default network name (SSID) should be “Rockspace_EXT,” or something similar. No password is required initially.
2. Access Extender Settings: Open a web browser and enter the URL provided in the extender’s manual (commonly something like http://re.rockspace.local or a specific IP address).
3. Setup Wizard: Follow the on-screen instructions. You will need to choose your region, set up an admin password for the extender, and select the Wi-Fi network you wish to extend.
4. Wi-Fi Details: Enter the Wi-Fi password of your existing network when prompted.
5. Finalize Setup: Complete the setup by following any additional on-screen instructions. Once finished, the extender will reboot and apply the settings.

Post-Installation

• Placement: After setting up, place the extender where it can provide the best extending performance. Avoid physical obstructions and interference sources.
• Testing: Check the extended network by connecting devices to the extender’s network and testing the internet connection in areas where coverage was previously weak.
• Adjustments: If necessary, you can log back into the extender’s settings to adjust configurations like SSID, password, or firmware updates.

Tips

• Ensure your router’s firmware is up to date for the best compatibility.
• The extender’s SSID can be different from your router’s to easily distinguish between networks.
• In case of any issues, consult the user manual or Rockspace support for troubleshooting tips.

The post How to setup Rockspace AC2100 Dual-band Wi-Fi Range Extender? appeared first on Re.Rockspace.local.

The Rockspace AC1200 is a powerful and flexible Wi-Fi range extender that lets you connect your devices quickly and reliably. With dual-band support for 2.4GHz and 5GHz bands, it can help you boost the coverage and performance of your home Wi-Fi network.

If you’re looking to extend the reach of your Wi-Fi network, the Setup Rockspace AC1200 is an excellent choice. The setup process is simple and straightforward, allowing you to get up and running in no time. Here are the steps to set up your Rockspace AC1200 range extender:

1. Plug in the extender: Connect the Rockspace AC1200 range extender to a power source and turn it on.
2. Connect to the extender’s Wi-Fi network: On a device with Wi-Fi capabilities, such as a smartphone, tablet, or computer, search for and connect to the Rockspace extender’s default Wi-Fi network. The network name (SSID) and password should be provided in the extender’s manual or on a sticker on the extender.
3. Access the extender’s web interface: Open a web browser and enter the extender’s IP address (usually http://192.168.0.254 or re.rockspace.local) into the address bar. This will take you to the extender’s login page.
4. Log in to the extender: Use the default login credentials provided in the manual or on the sticker on the extender to log in to the web interface.
5. Search for available Wi-Fi networks: From the extender’s web interface, go to the Wi-Fi settings page and search for available Wi-Fi networks. Select your main router’s Wi-Fi network from the list and enter the password.
6. Save the changes and reboot the extender: Save the changes you made to the Wi-Fi settings and reboot the extender to apply the new settings.
7. Verify the connection: Check if the extender is working by checking the Wi-Fi signal strength on a device that is connected to the extender’s Wi-Fi network. The device should be able to access the Internet.

With the Setup Rockspace AC1200, you can easily extend the reach of your Wi-Fi network and enjoy fast and reliable connectivity for all your devices. If you encounter any issues, refer to the extender’s user manual or contact Rockspace customer support for assistance.

The post How to Setup Rockspace AC1200 WIFI Extender. appeared first on Re.Rockspace.local.

ROCKSPACE WIFI RANGE EXTENDER are the easiest and fastest way to extend the range of your existing WIFI.

Follow these given steps to connect your ROCKSPACE WIFI RANGE EXETNDER to your phone or laptop:

• Firstly, turn off your mobile network before connecting.
• Then, plugin the WIFI extender into an electric socket.
• After that, wait till the indicator stays solid on.
• Now, open up WIFI on your android, iPhone or laptop.
• Choose ROCKSPACE WIFI EXTENDER to connect.
• Open up the web page after successful connection enter re.rockspace.local setup the password of the WIFI extender.
• Now, find the existing WIFI network that you wish to extend then, type on the existing WIFI network.
• Finally, it is successfully connected.
• Now you can relocate it on a place where the networks are not so good (dead zone area) or a place where you want to extend your network.

DEFAULT LOGIN TO ROCKSPACE WIFI RANGE EXTENDER

Before going to the configuration of the extender device you must know the login credential for your ROCKSPACE booster device to easily access settings and manage quickly. As, you can also find the default Login IP address, usernameand password printed to ROCKSPACE Sticker as well as a quick user manual included with the box.

Default Login URL– re.rockspace.local OR IP Address – 192.168.10.1

Default Username– NA

ROCKSPACE password– you have to create a new password for first time login.

When, everything is ready with you to setup a range extender device now the time to continue next steps.

Open your WEB BROWSER and access re.rockspace.local or 192.16810.1 and wait to load login page. Now you have to create a new login password for the range extender during first time setup. So, use a strong login passcode and then press the next button.

The post How To Connect Rockspace Wifi Extender appeared first on Re.Rockspace.local.

With customary wired systems, it is incredibly hard for somebody to take your data transfer capacity however the large issue with remote signs is that others can get to the Internet utilizing your broadband association even while they are in a neighboring structure or sitting in a vehicle that is left outside your loft.

There must be three reasons:

• This will build your month-to-month Internet bill particularly when you need to pay per byte of information moved.
• It will diminish your Internet get to speed since you are presently having a similar web association with different clients.
• It can make a security hazard as others may hack your PCs and access your own documents through your own wireless system.

How to Secure Wireless Network?

Securing your Wi-Fi network is not that difficult. Here are a few steps you need to follow to secure your home Wi-Fi network.

• First, you need to take your device and open the router’s setting in it. If you don’t know how to access the router’s setting, then follow these steps.
• On your device open the web browser, in the address bar type 192.168.0.254. And then you will see the login page. Type your credentials there username and password for the router.

Note:This is different for each router, so first check your router’s user manual.

• Once you have done, then we recommend you secure your network is to change its default password of the router.
• This helps you to protect others from accessing your network. You can change your password from setting by changing it from a general admin/password.
• The next thing we recommend to secure is to change your Network’s SSID name.
• SSID name always comes with default as setting you can change it from wireless settings in your router’s settings page.
• Make sure to create creative and difficult, because it will secure your network your hackers, and others.

Note:Don’t use your name, home address or other personal information in the SSID name.

• Next is to enable network encryption on your wireless network, in your router’s configuration page open wireless security settings.
• There choose the security method to choose WEP, otherwise, go with WPA2.
• Here, enter your password to access the network and make sure it should be a difficult one.
• There is another way also by reducing the range of your Wi-Fi signal.
• If your wireless router has a high range make it into your house range only.
• Decrease it by changing the mode of the router to 802.11g or use different Wi-Fi.
• Timely Upgrade your Router’s firmware to secure your network.
• You can find the existing firmware version of your router using from the router’s dashboard at 192.168.0.254

Who is connected to your Wireless Network?

On the off chance that you are stressed that outsider might be associating with the Internet utilizing your Wireless network, open your router’s administration page (utilizing the 192.168.0.254* location) and search for the DHCP Clients Table (it’s under Status > Local Network on Linksys switches). Here you will see a rundown everything being equal and wireless gadgets that are associated with your home network.

The post How to secure your Home Wi-Fi Network? appeared first on Re.Rockspace.local.

This extender comes up with many characteristics which are as follows:

• Permanent Signal Connection.
• Complete Signal Coverage.
• Compatible with every sort of router.

Apart from all these, you can locate a definite spot just with the help of the smart signal indicator. You can connect the extender through Graphical User Interface(GUI) or WPS connection. Rockspace wireless extender supports the dual-band technology that is 2Ghz to 5Ghz. And this extender also has a warranty which is a good thing for customers. Let’s start the Rockspace Repeater setup:

1. Firstly you need to plug in Rockspace AC750 Extender into power it via an electrical AC outlet.
2. After that connect your extender to the close power AC outlet.
3. Once done connect your wifi device to extender’s wifi network and make sure that mobile data of your device should not be turned on.
4. Now open any web browser on your device and in the address bar enter the URL http://re.rockspace.local or type 192.168.0.254.
5. Here you need to create the login username and password or you can choose a default username then select the wifi network that needs to be extended.
6. Enter the wifi password and hold on till the extender starts appearing.
7. Once the Setup RSD0607 Rockspace Extender is done reposition the extender in between the router and dead area.
8. When it spots the coverage you will get to know about it via an LED indicator which will turn blue.

Rockspace AC750 Repeater setup via WPS

• To Setup Rockspace AC750 Extender first, you need to plugin into any power socket which is nearer to the router.
• When LED starts lighting blue then you can start with the setup process.
• After the LED indicator starts lightning press the WPS button of the router.
• Within two minutes of pressing the WPS button of the router press the WPS button of Extender as well and check if the LED signal turns blue or red.
• Relocate the Rockspace extender in between the router and dead spot and check the coverage strength with an LED indicator.
• Once you get the full coverage strength then you can freely use your network without any disturbance.

Rock Space AC750 RSD0607 extender as an Access Point

• First, you need to plug into the electrical power outlet Setup AC750 Rockspace Extender.
• Connect your router and extender via good quality ethernet cable.
• Open the web page and visit 192.168.0.254 or type the URL http://re.rockspace.local and from the menu select the option mode.
• Last but not least set up an SSID and Password.

Features of Rock Space AC750 extender

Rockspace AC750 extender has multiple new features which make it unique and compatible as mentioned below:

1. Steady signal connection with dual-band technology
2. Compatible with almost every router.
3. Consists of dual antennas which raises signal coverage.
4. It can be easily set up through the WPS button or web user interface.
5. Smart signal LED indicator that supports in finding accurate spots.

The post How to Setup Rockspace AC750 Extender? appeared first on Re.Rockspace.local.

To Setup Rockspace AC1200 Wi-Fi Range Extender eliminates dead spots in your home by increasing the router’s Wi-Fi signal and extending coverage up to 7,500 Sq. Ft. The Rockpsace AC1200 features Cross-Band Technology, which receives information on one band and transmits on another, resulting in a stronger, more consistent signal throughout your home. Range extender easily connects to your current network.

Dual Bands (2.4 and 5 GHz bands)

Using any mobile device, Spot Finder Technology shows you where to place range extender for optimal performance. It comes with Wi-Fi Audio through which you can connect a stereo system or speakers to range extender and instantly stream music from your smart device or computer.

It can work with any router means no need to modify router settings. The Simultaneous Dual Bands (2.4 and 5 GHz bands) reduces traffic and maximize the internet speed and offer up to 300Mbps data transfer on each band.

 

The Rockspace AC1200 can be setup by following the steps mentioned below:

• Firstly, To start the setup, you need to have the SSID and Wi-Fi password of the main router network. Then you need to plug in the Re.Rockspace extender to the working power outlet.
• Secondly, To start the setup, you need to have the SSID and Wi-Fi password of the main router network. Then you need to plug in the Rockspace AC1200 extender to the working power outlet.
• After joining the setup, open any browser in your device and search for the default IP address by typing 192.168.10.1 or re.rockspace.local.
• Now login by typing admin as the password and after this the device will perform a scan for the networks available. Out of these networks, select the main Wi-Fi network.
• Now follow the instructions given on the page through which the extender will be connected to the router network successfully.

Note:- You can also call on the Technical Support helpline for further assistance.

The post How to Setup Rockspace AC1200 extender? appeared first on Re.Rockspace.local.