With customary wired systems, it is incredibly hard for somebody to take your data transfer capacity however the large issue with remote signs is that others can get to the Internet utilizing your broadband association even while they are in a neighboring structure or sitting in a vehicle that is left outside your loft.

There must be three reasons:

• This will build your month-to-month Internet bill particularly when you need to pay per byte of information moved.
• It will diminish your Internet get to speed since you are presently having a similar web association with different clients.
• It can make a security hazard as others may hack your PCs and access your own documents through your own wireless system.

How to Secure Wireless Network?

Securing your Wi-Fi network is not that difficult. Here are a few steps you need to follow to secure your home Wi-Fi network.

• First, you need to take your device and open the router’s setting in it. If you don’t know how to access the router’s setting, then follow these steps.
• On your device open the web browser, in the address bar type 192.168.0.254. And then you will see the login page. Type your credentials there username and password for the router.

Note:This is different for each router, so first check your router’s user manual.

• Once you have done, then we recommend you secure your network is to change its default password of the router.
• This helps you to protect others from accessing your network. You can change your password from setting by changing it from a general admin/password.
• The next thing we recommend to secure is to change your Network’s SSID name.
• SSID name always comes with default as setting you can change it from wireless settings in your router’s settings page.
• Make sure to create creative and difficult, because it will secure your network your hackers, and others.

Note:Don’t use your name, home address or other personal information in the SSID name.

• Next is to enable network encryption on your wireless network, in your router’s configuration page open wireless security settings.
• There choose the security method to choose WEP, otherwise, go with WPA2.
• Here, enter your password to access the network and make sure it should be a difficult one.
• There is another way also by reducing the range of your Wi-Fi signal.
• If your wireless router has a high range make it into your house range only.
• Decrease it by changing the mode of the router to 802.11g or use different Wi-Fi.
• Timely Upgrade your Router’s firmware to secure your network.
• You can find the existing firmware version of your router using from the router’s dashboard at 192.168.0.254

Who is connected to your Wireless Network?

On the off chance that you are stressed that outsider might be associating with the Internet utilizing your Wireless network, open your router’s administration page (utilizing the 192.168.0.254* location) and search for the DHCP Clients Table (it’s under Status > Local Network on Linksys switches). Here you will see a rundown everything being equal and wireless gadgets that are associated with your home network.

The post How to secure your Home Wi-Fi Network? appeared first on Re.Rockspace.local.

Steps to Connect Rockspace extender with the Amazon Firestick-

In the Firestick menu, you need to navigate to the “Settings” option. To see how you can use the remote to navigate, have a look at the option shown in the picture.

Under the settings menu, you’ll see 3 ways to connect the Firestick to the WiFi. You can choose any one of them. The options are shown in the picture.

• See All Network
• Then Join Network using WPS (button)
• Join Network using WPS (PIN)
• Join Other Network

See All Network-

• In this option, you’ll see all the WiFi networks available at your location.
• Choose your home WiFi and hit the connect option.
• It will require your WiFi password. Once you connected to the home WiFi or Rockspace extender setup WiFi, you can start using your Firestick online.

Join Network using WPS (button)–

• To use this option on your Amazon Firestick menu, you need to press the physical button on the Rockspace Extender.
• On the Rockspace AC1200 Extender, and Rockspace AC750 Extender you’ll find the WPS button on the front side marked as “WPS”.
• In this method, you don’t need to put any WiFi password manually. The Firestick collects the required information to connect with the Rockspace extender automatically.

Join Network using WPS (PIN)

• To Connect with WPS (PIN) Method you need the WPS PIN mentioned on the Rockspace extender.
• Enter the PIN and press the WPS on the Rockspace Extender.
• Wait for 2 minutes for a successful connection.
• You’ll see a success message on your TV screen.

The post How to connect Rockspace extender with the Firestick? appeared first on Re.Rockspace.local.