If you’re experiencing connectivity issues with your Rockspace AC1200 Wi-Fi extender or simply want to restore it to its factory settings, performing a reset is the solution. Resetting your extender can help resolve technical glitches, forgotten passwords, or configuration errors. In this guide, we’ll walk you through the simple steps to reset your Rockspace AC1200 Wi-Fi extender and get it back up and running smoothly.
Why Reset Your Rockspace AC1200 Wi-Fi Extender?
The Rockspace AC1200 extender is a reliable device designed to boost your internet coverage. However, like any tech gadget, it may occasionally encounter issues such as:
- Difficulty connecting to your router.
- Forgotten login credentials.
- Poor performance or slow speeds.
- Configuration errors during setup.
A reset restores the extender to its original factory settings, allowing you to start fresh and reconfigure it for optimal performance.
How to Reset Your Rockspace AC1200 Wi-Fi Extender
Resetting your Rockspace AC1200 Wi-Fi extender is a quick and straightforward process. Follow these steps to get it done:
Step 1: Locate the Reset Button
The reset button on the Rockspace AC1200 is typically a small pinhole located on the side or bottom of the device. You’ll need a paperclip, pin, or similar tool to press it.
Step 2: Power On the Extender
Ensure your extender is plugged into a power outlet and turned on. The LED lights should be visible, indicating that the device is powered up.
Step 3: Press and Hold the Reset Button
Using your paperclip or pin, press and hold the reset button for 10–15 seconds. You’ll notice the LED lights blinking or changing color, signaling that the reset process has started.
Step 4: Wait for the Reset to Complete
After releasing the button, the extender will reboot and restore its factory settings. This process may take a few minutes. Once completed, all previous configurations, including Wi-Fi network names and passwords, will be erased.
What to Do After Resetting Your Rockspace AC1200 Extender
Once the reset is complete, you’ll need to reconfigure your extender to connect it to your Wi-Fi network. Here’s how:
Connect to the Extender’s Default Network:
- On your smartphone, tablet, or computer, go to the Wi-Fi settings.
- Look for the default network name (e.g., “Rockspace_XXXX”) and connect to it. The default password is usually printed on the extender’s label or in the user manual.
Access the Setup Page:
- Open a web browser and enter the extender’s default IP address (e.g.,
http://re.rockspace.localor192.168.0.254). - Follow the on-screen instructions to set up your extender.
Reconnect Your Devices:
After reconfiguring the extender, reconnect your devices to the extended Wi-Fi network.
Troubleshooting Tips for Rockspace AC1200 Wi-Fi Extender Reset
- Reset Button Not Working: Ensure you’re holding the button for the full 10–15 seconds. If it still doesn’t work, unplug the extender, wait 30 seconds, and try again.
- No LED Indicators: Check that the extender is properly plugged into a power outlet.
- Forgotten Default Password: Refer to the label on the extender or the user manual for the default credentials.
By following this guide, you’ll have no trouble performing a Rockspace AC1200 Wi-Fi extender reset and ensuring your device works like new.